ARM: 9381/1: kasan: clear stale stack poison

[ Upstream commit c4238686f9093b98bd6245a348bcf059cdce23af ]

We found below OOB crash:

[   33.452494] ==================================================================
[   33.453513] BUG: KASAN: stack-out-of-bounds in refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec
[   33.454660] Write of size 164 at addr c1d03d30 by task swapper/0/0
[   33.455515]
[   33.455767] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O       6.1.25-mainline #1
[   33.456880] Hardware name: Generic DT based system
[   33.457555]  unwind_backtrace from show_stack+0x18/0x1c
[   33.458326]  show_stack from dump_stack_lvl+0x40/0x4c
[   33.459072]  dump_stack_lvl from print_report+0x158/0x4a4
[   33.459863]  print_report from kasan_report+0x9c/0x148
[   33.460616]  kasan_report from kasan_check_range+0x94/0x1a0
[   33.461424]  kasan_check_range from memset+0x20/0x3c
[   33.462157]  memset from refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec
[   33.463064]  refresh_cpu_vm_stats.constprop.0 from tick_nohz_idle_stop_tick+0x180/0x53c
[   33.464181]  tick_nohz_idle_stop_tick from do_idle+0x264/0x354
[   33.465029]  do_idle from cpu_startup_entry+0x20/0x24
[   33.465769]  cpu_startup_entry from rest_init+0xf0/0xf4
[   33.466528]  rest_init from arch_post_acpi_subsys_init+0x0/0x18
[   33.467397]
[   33.467644] The buggy address belongs to stack of task swapper/0/0
[   33.468493]  and is located at offset 112 in frame:
[   33.469172]  refresh_cpu_vm_stats.constprop.0+0x0/0x2ec
[   33.469917]
[   33.470165] This frame has 2 objects:
[   33.470696]  [32, 76) 'global_zone_diff'
[   33.470729]  [112, 276) 'global_node_diff'
[   33.471294]
[   33.472095] The buggy address belongs to the physical page:
[   33.472862] page:3cd72da8 refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x41d03
[   33.473944] flags: 0x1000(reserved|zone=0)
[   33.474565] raw: 00001000 ed741470 ed741470 00000000 00000000 00000000 ffffffff 00000001
[   33.475656] raw: 00000000
[   33.476050] page dumped because: kasan: bad access detected
[   33.476816]
[   33.477061] Memory state around the buggy address:
[   33.477732]  c1d03c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   33.478630]  c1d03c80: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00
[   33.479526] >c1d03d00: 00 04 f2 f2 f2 f2 00 00 00 00 00 00 f1 f1 f1 f1
[   33.480415]                                                ^
[   33.481195]  c1d03d80: 00 00 00 00 00 00 00 00 00 00 04 f3 f3 f3 f3 f3
[   33.482088]  c1d03e00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
[   33.482978] ==================================================================

We find the root cause of this OOB is that arm does not clear stale stack
poison in the case of cpuidle.

This patch refer to arch/arm64/kernel/sleep.S to resolve this issue.

From cited commit [1] that explain the problem

Functions which the compiler has instrumented for KASAN place poison on
the stack shadow upon entry and remove this poison prior to returning.

In the case of cpuidle, CPUs exit the kernel a number of levels deep in
C code.  Any instrumented functions on this critical path will leave
portions of the stack shadow poisoned.

If CPUs lose context and return to the kernel via a cold path, we
restore a prior context saved in __cpu_suspend_enter are forgotten, and
we never remove the poison they placed in the stack shadow area by
functions calls between this and the actual exit of the kernel.

Thus, (depending on stackframe layout) subsequent calls to instrumented
functions may hit this stale poison, resulting in (spurious) KASAN
splats to the console.

To avoid this, clear any stale poison from the idle thread for a CPU
prior to bringing a CPU online.

From cited commit [2]

Extend to check for CONFIG_KASAN_STACK

[1] commit 0d97e6d8024c ("arm64: kasan: clear stale stack poison")
[2] commit d56a9ef84bd0 ("kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK")

Signed-off-by: Boy Wu <boy.wu@mediatek.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 5615f69bc209 ("ARM: 9016/2: Initialize the mapping of KASan shadow memory")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Preserve vlan tags for transport mode software GRO

[ Upstream commit 58fbfecab965014b6e3cc956a76b4a96265a1add ]

The software GRO path for esp transport mode uses skb_mac_header_rebuild
prior to re-injecting the packet via the xfrm_napi_dev.  This only
copies skb->mac_len bytes of header which may not be sufficient if the
packet contains 802.1Q tags or other VLAN tags.  Worse copying only the
initial header will leave a packet marked as being VLAN tagged but
without the corresponding tag leading to mangling when it is later
untagged.

The VLAN tags are important when receiving the decrypted esp transport
mode packet after GRO processing to ensure it is received on the correct
interface.

Therefore record the full mac header length in xfrm*_transport_input for
later use in corresponding xfrm*_transport_finish to copy the entire mac
header when rebuilding the mac header for GRO.  The skb->data pointer is
left pointing skb->mac_header bytes after the start of the mac header as
is expected by the network stack and network and transport header
offsets reset to this location.

Fixes: 7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qibfs: fix dentry leak

[ Upstream commit aa23317d0268b309bb3f0801ddd0d61813ff5afb ]

simple_recursive_removal() drops the pinning references to all positives
in subtree.  For the cases when its argument has been kept alive by
the pinning alone that's exactly the right thing to do, but here
the argument comes from dcache lookup, that needs to be balanced by
explicit dput().

Fixes: e41d237818598 "qib_fs: switch to simple_recursive_removal()"
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: Improved check for empty queue

[ Upstream commit 405df89dd52cbcd69a3cd7d9a10d64de38f854b2 ]

We noticed some rare sk_buffs were stepping past the queue when system was
under memory pressure. The general theory is to skip enqueueing
sk_buffs when its not necessary which is the normal case with a system
that is properly provisioned for the task, no memory pressure and enough
cpu assigned.

But, if we can't allocate memory due to an ENOMEM error when enqueueing
the sk_buff into the sockmap receive queue we push it onto a delayed
workqueue to retry later. When a new sk_buff is received we then check
if that queue is empty. However, there is a problem with simply checking
the queue length. When a sk_buff is being processed from the ingress queue
but not yet on the sockmap msg receive queue its possible to also recv
a sk_buff through normal path. It will check the ingress queue which is
zero and then skip ahead of the pkt being processed.

Previously we used sock lock from both contexts which made the problem
harder to hit, but not impossible.

To fix instead of popping the skb from the queue entirely we peek the
skb from the queue and do the copy there. This ensures checks to the
queue length are non-zero while skb is being processed. Then finally
when the entire skb has been copied to user space queue or another
socket we pop it off the queue. This way the queue length check allows
bypassing the queue only after the list has been completely processed.

To reproduce issue we run NGINX compliance test with sockmap running and
observe some flakes in our testing that we attributed to this issue.

Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: William Findlay <will@isovalent.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-5-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: Reschedule is now done through backlog

[ Upstream commit bce22552f92ea7c577f49839b8e8f7d29afaf880 ]

Now that the backlog manages the reschedule() logic correctly we can drop
the partial fix to reschedule from recvmsg hook.

Rescheduling on recvmsg hook was added to address a corner case where we
still had data in the backlog state but had nothing to kick it and
reschedule the backlog worker to run and finish copying data out of the
state. This had a couple limitations, first it required user space to
kick it introducing an unnecessary EBUSY and retry. Second it only
handled the ingress case and egress redirects would still be hung.

With the correct fix, pushing the reschedule logic down to where the
enomem error occurs we can drop this fix.

Fixes: bec217197b412 ("skmsg: Schedule psock work if the cached skb exists on the psock")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-4-john.fastabend@gmail.com
Stable-dep-of: 405df89dd52c ("bpf, sockmap: Improved check for empty queue")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: Convert schedule_work into delayed_work

[ Upstream commit 29173d07f79883ac94f5570294f98af3d4287382 ]

Sk_buffs are fed into sockmap verdict programs either from a strparser
(when the user might want to decide how framing of skb is done by attaching
another parser program) or directly through tcp_read_sock. The
tcp_read_sock is the preferred method for performance when the BPF logic is
a stream parser.

The flow for Cilium's common use case with a stream parser is,

 tcp_read_sock()
  sk_psock_verdict_recv
    ret = bpf_prog_run_pin_on_cpu()
    sk_psock_verdict_apply(sock, skb, ret)
     // if system is under memory pressure or app is slow we may
     // need to queue skb. Do this queuing through ingress_skb and
     // then kick timer to wake up handler
     skb_queue_tail(ingress_skb, skb)
     schedule_work(work);

The work queue is wired up to sk_psock_backlog(). This will then walk the
ingress_skb skb list that holds our sk_buffs that could not be handled,
but should be OK to run at some later point. However, its possible that
the workqueue doing this work still hits an error when sending the skb.
When this happens the skbuff is requeued on a temporary 'state' struct
kept with the workqueue. This is necessary because its possible to
partially send an skbuff before hitting an error and we need to know how
and where to restart when the workqueue runs next.

Now for the trouble, we don't rekick the workqueue. This can cause a
stall where the skbuff we just cached on the state variable might never
be sent. This happens when its the last packet in a flow and no further
packets come along that would cause the system to kick the workqueue from
that side.

To fix we could do simple schedule_work(), but while under memory pressure
it makes sense to back off some instead of continue to retry repeatedly. So
instead to fix convert schedule_work to schedule_delayed_work and add
backoff logic to reschedule from backlog queue on errors. Its not obvious
though what a good backoff is so use '1'.

To test we observed some flakes whil running NGINX compliance test with
sockmap we attributed these failed test to this bug and subsequent issue.

>From on list discussion. This commit

 bec217197b41("skmsg: Schedule psock work if the cached skb exists on the psock")

was intended to address similar race, but had a couple cases it missed.
Most obvious it only accounted for receiving traffic on the local socket
so if redirecting into another socket we could still get an sk_buff stuck
here. Next it missed the case where copied=0 in the recv() handler and
then we wouldn't kick the scheduler. Also its sub-optimal to require
userspace to kick the internal mechanisms of sockmap to wake it up and
copy data to user. It results in an extra syscall and requires the app
to actual handle the EAGAIN correctly.

Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: William Findlay <will@isovalent.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-3-john.fastabend@gmail.com
Stable-dep-of: 405df89dd52c ("bpf, sockmap: Improved check for empty queue")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: Handle fin correctly

[ Upstream commit 901546fd8f9ca4b5c481ce00928ab425ce9aacc0 ]

The sockmap code is returning EAGAIN after a FIN packet is received and no
more data is on the receive queue. Correct behavior is to return 0 to the
user and the user can then close the socket. The EAGAIN causes many apps
to retry which masks the problem. Eventually the socket is evicted from
the sockmap because its released from sockmap sock free handling. The
issue creates a delay and can cause some errors on application side.

To fix this check on sk_msg_recvmsg side if length is zero and FIN flag
is set then set return to zero. A selftest will be added to check this
condition.

Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: William Findlay <will@isovalent.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-6-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: TCP data stall on recv before accept

[ Upstream commit ea444185a6bf7da4dd0df1598ee953e4f7174858 ]

A common mechanism to put a TCP socket into the sockmap is to hook the
BPF_SOCK_OPS_{ACTIVE_PASSIVE}_ESTABLISHED_CB event with a BPF program
that can map the socket info to the correct BPF verdict parser. When
the user adds the socket to the map the psock is created and the new
ops are assigned to ensure the verdict program will 'see' the sk_buffs
as they arrive.

Part of this process hooks the sk_data_ready op with a BPF specific
handler to wake up the BPF verdict program when data is ready to read.
The logic is simple enough (posted here for easy reading)

 static void sk_psock_verdict_data_ready(struct sock *sk)
 {
struct socket *sock = sk->sk_socket;

if (unlikely(!sock || !sock->ops || !sock->ops->read_skb))
return;
sock->ops->read_skb(sk, sk_psock_verdict_recv);
 }

The oversight here is sk->sk_socket is not assigned until the application
accepts() the new socket. However, its entirely ok for the peer application
to do a connect() followed immediately by sends. The socket on the receiver
is sitting on the backlog queue of the listening socket until its accepted
and the data is queued up. If the peer never accepts the socket or is slow
it will eventually hit data limits and rate limit the session. But,
important for BPF sockmap hooks when this data is received TCP stack does
the sk_data_ready() call but the read_skb() for this data is never called
because sk_socket is missing. The data sits on the sk_receive_queue.

Then once the socket is accepted if we never receive more data from the
peer there will be no further sk_data_ready calls and all the data
is still on the sk_receive_queue(). Then user calls recvmsg after accept()
and for TCP sockets in sockmap we use the tcp_bpf_recvmsg_parser() handler.
The handler checks for data in the sk_msg ingress queue expecting that
the BPF program has already run from the sk_data_ready hook and enqueued
the data as needed. So we are stuck.

To fix do an unlikely check in recvmsg handler for data on the
sk_receive_queue and if it exists wake up data_ready. We have the sock
locked in both read_skb and recvmsg so should avoid having multiple
runners.

Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-7-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net:usb:qmi_wwan: support Rolling modules

[ Upstream commit d362046021ea122309da8c8e0b6850c792ca97b5 ]

Update the qmi_wwan driver support for the Rolling
LTE modules.

- VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET
interface for /Linux/Chrome OS)
0x0104: RMNET, diag, at, pipe

Here are the outputs of usb-devices:
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=33f8 ProdID=0104 Rev=05.04
S:  Manufacturer=Rolling Wireless S.a.r.l.
S:  Product=Rolling Module
S:  SerialNumber=ba2eb033
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Signed-off-by: Vanillan Wang <vanillanwang@163.com>
Link: https://lore.kernel.org/r/20240416120713.24777-1-vanillanwang@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/dp: Don't probe eDP ports twice harder

[ Upstream commit bf52d7f9b2067f02efe7e32697479097aba4a055 ]

I didn't pay close enough attention the last time I tried to fix this
problem - while we currently do correctly take care to make sure we don't
probe a connected eDP port more then once, we don't do the same thing for
eDP ports we found to be disconnected.

So, fix this and make sure we only ever probe eDP ports once and then leave
them at that connector state forever (since without HPD, it's not going to
change on its own anyway). This should get rid of the last few GSP errors
getting spit out during runtime suspend and resume on some machines, as we
tried to reprobe eDP ports in response to ACPI hotplug probe events.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404233736.7946-3-lyude@redhat.com
(cherry picked from commit fe6660b661c3397af0867d5d098f5b26581f1290)
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/9p: drop inodes immediately on non-.L too

[ Upstream commit 7fd524b9bd1be210fe79035800f4bd78a41b349f ]

Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: Don't hold prepare_lock when calling kref_put()

[ Upstream commit 6f63af7511e7058f3fa4ad5b8102210741c9f947 ]

We don't need to hold the prepare_lock when dropping a ref on a struct
clk_core. The release function is only freeing memory and any code with
a pointer reference has already unlinked anything pointing to the
clk_core. This reduces the holding area of the prepare_lock a bit.

Note that we also don't call free_clk() with the prepare_lock held.
There isn't any reason to do that.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-3-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: crystalcove: Use -ENOTSUPP consistently

[ Upstream commit ace0ebe5c98d66889f19e0f30e2518d0c58d0e04 ]

The GPIO library expects the drivers to return -ENOTSUPP in some
cases and not using analogue POSIX code. Make the driver to follow
this.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: wcove: Use -ENOTSUPP consistently

[ Upstream commit 0c3b532ad3fbf82884a2e7e83e37c7dcdd4d1d99 ]

The GPIO library expects the drivers to return -ENOTSUPP in some
cases and not using analogue POSIX code. Make the driver to follow
this.

Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p: explicitly deny setlease attempts

[ Upstream commit 7a84602297d36617dbdadeba55a2567031e5165b ]

9p is a remote network protocol, and it doesn't support asynchronous
notifications from the server. Ensure that we don't hand out any leases
since we can't guarantee they'll be broken when a file's contents
change.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/9p: translate O_TRUNC into OTRUNC

[ Upstream commit 87de39e70503e04ddb58965520b15eb9efa7eef3 ]

This one hits both 9P2000 and .u as it appears v9fs has never translated
the O_TRUNC flag.

Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/9p: only translate RWX permissions for plain 9P2000

[ Upstream commit cd25e15e57e68a6b18dc9323047fe9c68b99290b ]

Garbage in plain 9P2000's perm bits is allowed through, which causes it
to be able to set (among others) the suid bit. This was presumably not
the intent since the unix extended bits are handled explicitly and
conditionally on .u.

Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu: mtk: fix module autoloading

[ Upstream commit 7537e31df80cb58c27f3b6fef702534ea87a5957 ]

Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240410164109.233308-1-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: timers: Fix valid-adjtimex signed left-shift undefined behavior

[ Upstream commit 076361362122a6d8a4c45f172ced5576b2d4a50d ]

The struct adjtimex freq field takes a signed value who's units are in
shifted (<<16) parts-per-million.

Unfortunately for negative adjustments, the straightforward use of:

  freq = ppm << 16 trips undefined behavior warnings with clang:

valid-adjtimex.c:66:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
        -499<<16,
        ~~~~^
valid-adjtimex.c:67:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
        -450<<16,
        ~~~~^
..

Fix it by using a multiply by (1 << 16) instead of shifting negative values
in the valid-adjtimex test case. Align the values for better readability.

Reported-by: Lee Jones <joneslee@google.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240409202222.2830476-1-jstultz@google.com
Link: https://lore.kernel.org/lkml/0c6d4f0d-2064-4444-986b-1d1ed782135f@collabora.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: scall: Save thread_info.syscall unconditionally on entry

[ Upstream commit 4370b673ccf240bf7587b0cb8e6726a5ccaf1f17 ]

thread_info.syscall is used by syscall_get_nr to supply syscall nr
over a thread stack frame.

Previously, thread_info.syscall is only saved at syscall_trace_enter
when syscall tracing is enabled. However rest of the kernel code do
expect syscall_get_nr to be available without syscall tracing. The
previous design breaks collect_syscall.

Move saving process to syscall entry to fix it.

Reported-by: Xi Ruoyao <xry111@xry111.site>
Link: https://github.com/util-linux/util-linux/issues/2867
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: host1x: Do not setup DMA for virtual devices

[ Upstream commit 8ab58f6841b19423231c5db3378691ec80c778f8 ]

The host1x devices are virtual compound devices and do not perform DMA
accesses themselves, so they do not need to be set up for DMA.

Ideally we would also not need to set up DMA masks for the virtual
devices, but we currently still need those for legacy support on old
hardware.

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314154943.2487549-1-thierry.reding@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-iocost: avoid out of bounds shift

[ Upstream commit beaa51b36012fad5a4d3c18b88a617aea7a9b96d ]

UBSAN catches undefined behavior in blk-iocost, where sometimes
iocg->delay is shifted right by a number that is too large,
resulting in undefined behavior on some architectures.

[  186.556576] ------------[ cut here ]------------
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1366:23
shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long')
CPU: 16 PID: 0 Comm: swapper/16 Tainted: G S          E    N 6.9.0-0_fbk700_debug_rc2_kbuilder_0_gc85af715cac0 #1
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A23 12/08/2020
Call Trace:
 <IRQ>
 dump_stack_lvl+0x8f/0xe0
 __ubsan_handle_shift_out_of_bounds+0x22c/0x280
 iocg_kick_delay+0x30b/0x310
 ioc_timer_fn+0x2fb/0x1f80
 __run_timer_base+0x1b6/0x250
...

Avoid that undefined behavior by simply taking the
"delay = 0" branch if the shift is too large.

I am not sure what the symptoms of an undefined value
delay will be, but I suspect it could be more than a
little annoying to debug.

Signed-off-by: Rik van Riel <riel@surriel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jens Axboe <axboe@kernel.dk>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240404123253.0f58010f@imladris.surriel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: Fix SELinux error when systemd-modules loads the target module

[ Upstream commit 97a54ef596c3fd24ec2b227ba8aaf2cf5415e779 ]

If the systemd-modules service loads the target module, the credentials of
that userspace process will be used to validate the access to the target db
directory.  SELinux will prevent it, reporting an error like the following:

kernel: audit: type=1400 audit(1676301082.205:4): avc: denied  { read }
for  pid=1020 comm="systemd-modules" name="target" dev="dm-3"
ino=4657583 scontext=system_u:system_r:systemd_modules_load_t:s0
tcontext=system_u:object_r:targetd_etc_rw_t:s0 tclass=dir permissive=0

Fix the error by using the kernel credentials to access the db directory

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20240215143944.847184-2-mlombard@redhat.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: always clear PERTRANS metadata during commit

[ Upstream commit 6e68de0bb0ed59e0554a0c15ede7308c47351e2d ]

It is possible to clear a root's IN_TRANS tag from the radix tree, but
not clear its PERTRANS, if there is some error in between. Eliminate
that possibility by moving the free up to where we clear the tag.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: make btrfs_clear_delalloc_extent() free delalloc reserve

[ Upstream commit 3c6f0c5ecc8910d4ffb0dfe85609ebc0c91c8f34 ]

Currently, this call site in btrfs_clear_delalloc_extent() only converts
the reservation. We are marking it not delalloc, so I don't think it
makes sense to keep the rsv around.  This is a path where we are not
sure to join a transaction, so it leads to incorrect free-ing during
umount.

Helps with the pass rate of generic/269 and generic/475.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/power turbostat: Fix Bzy_MHz documentation typo

[ Upstream commit 0b13410b52c4636aacb6964a4253a797c0fa0d16 ]

The code calculates Bzy_MHz by multiplying TSC_delta * APERF_delta/MPERF_delta
The man page erroneously showed that TSC_delta was divided.

Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/power turbostat: Fix added raw MSR output

[ Upstream commit e5f4e68eed85fa8495d78cd966eecc2b27bb9e53 ]

When using --Summary mode, added MSRs in raw mode always
print zeros. Print the actual register contents.

Example, with patch:

note the added column:
--add msr0x64f,u32,package,raw,REASON

Where:

0x64F is MSR_CORE_PERF_LIMIT_REASONS

Busy%   Bzy_MHz PkgTmp  PkgWatt CorWatt     REASON
0.00    4800    35      1.42    0.76    0x00000000
0.00    4801    34      1.42    0.76    0x00000000
80.08   4531    66      108.17  107.52  0x08000000
98.69   4530    66      133.21  132.54  0x08000000
99.28   4505    66      128.26  127.60  0x0c000400
99.65   4486    68      124.91  124.25  0x0c000400
99.63   4483    68      124.90  124.25  0x0c000400
79.34   4481    41      99.80   99.13   0x0c000000
0.00    4801    41      1.40    0.73    0x0c000000

Where, for the test processor (i5-10600K):

PKG Limit #1: 125.000 Watts, 8.000000 sec
MSR bit 26 = log; bit 10 = status

PKG Limit #2: 136.000 Watts, 0.002441 sec
MSR bit 27 = log; bit 11 = status

Example, without patch:

Busy%   Bzy_MHz PkgTmp  PkgWatt CorWatt     REASON
0.01    4800    35      1.43    0.77    0x00000000
0.00    4801    35      1.39    0.73    0x00000000
83.49   4531    66      112.71  112.06  0x00000000
98.69   4530    68      133.35  132.69  0x00000000
99.31   4500    67      127.96  127.30  0x00000000
99.63   4483    69      124.91  124.25  0x00000000
99.61   4481    69      124.90  124.25  0x00000000
99.61   4481    71      124.92  124.25  0x00000000
59.35   4479    42      75.03   74.37   0x00000000
0.00    4800    42      1.39    0.73    0x00000000
0.00    4801    42      1.42    0.76    0x00000000

c000000

[lenb: simplified patch to apply only to package scope]

Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firewire: ohci: mask bus reset interrupts between ISR and bottom half

[ Upstream commit 752e3c53de0fa3b7d817a83050b6699b8e9c6ec9 ]

In the FireWire OHCI interrupt handler, if a bus reset interrupt has
occurred, mask bus reset interrupts until bus_reset_work has serviced and
cleared the interrupt.

Normally, we always leave bus reset interrupts masked. We infer the bus
reset from the self-ID interrupt that happens shortly thereafter. A
scenario where we unmask bus reset interrupts was introduced in 2008 in
a007bb857e0b26f5d8b73c2ff90782d9c0972620: If
OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we
will unmask bus reset interrupts so we can log them.

irq_handler logs the bus reset interrupt. However, we can't clear the bus
reset event flag in irq_handler, because we won't service the event until
later. irq_handler exits with the event flag still set. If the
corresponding interrupt is still unmasked, the first bus reset will
usually freeze the system due to irq_handler being called again each
time it exits. This freeze can be reproduced by loading firewire_ohci
with "modprobe firewire_ohci debug=-1" (to enable all debugging output).
Apparently there are also some cases where bus_reset_work will get called
soon enough to clear the event, and operation will continue normally.

This freeze was first reported a few months after a007bb85 was committed,
but until now it was never fixed. The debug level could safely be set
to -1 through sysfs after the module was loaded, but this would be
ineffectual in logging bus reset interrupts since they were only
unmasked during initialization.

irq_handler will now leave the event flag set but mask bus reset
interrupts, so irq_handler won't be called again and there will be no
freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will
unmask the interrupt after servicing the event, so future interrupts
will be caught as desired.

As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be
enabled through sysfs in addition to during initial module loading.
However, when enabled through sysfs, logging of bus reset interrupts will
be effective only starting with the second bus reset, after
bus_reset_work has executed.

Signed-off-by: Adam Goldman <adamg@pobox.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: sata_gemini: Check clk_enable() result

[ Upstream commit e85006ae7430aef780cc4f0849692e266a102ec0 ]

The call to clk_enable() in gemini_sata_start_bridge() can fail.
Add a check to detect such failure.

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: Reset RBUF on first open

[ Upstream commit 0a6380cb4c6b5c1d6dad226ba3130f9090f0ccea ]

If the RBUF logic is not reset when the kernel starts then there
may be some data left over from any network boot loader. If the
64-byte packet headers are enabled then this can be fatal.

Extend bcmgenet_dma_disable to do perform the reset, but not when
called from bcmgenet_resume in order to preserve a wake packet.

N.B. This different handling of resume is just based on a hunch -
why else wouldn't one reset the RBUF as well as the TBUF? If this
isn't the case then it's easy to change the patch to make the RBUF
reset unconditional.

See: https://github.com/raspberrypi/linux/issues/3850
See: https://github.com/raspberrypi/firmware/issues/1882

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Maarten Vanraes <maarten@rmail.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: line6: Zero-initialize message buffers

[ Upstream commit c4e51e424e2c772ce1836912a8b0b87cd61bc9d5 ]

For shutting up spurious KMSAN uninit-value warnings, just replace
kmalloc() calls with kzalloc() for the buffers used for
communications.  There should be no real issue with the original code,
but it's still better to cover.

Reported-by: syzbot+7fb05ccf7b3d2f9617b3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/00000000000084b18706150bcca5@google.com
Message-ID: <20240402063628.26609-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries

[ Upstream commit 54babdc0343fff2f32dfaafaaa9e42c4db278204 ]

When KCSAN and CONSTRUCTORS are enabled, one can trigger the

  "Unpatched return thunk in use. This should not happen!"

catch-all warning.

Usually, when objtool runs on the .o objects, it does generate a section
.return_sites which contains all offsets in the objects to the return
thunks of the functions present there. Those return thunks then get
patched at runtime by the alternatives.

KCSAN and CONSTRUCTORS add this to the object file's .text.startup
section:

  -------------------
  Disassembly of section .text.startup:

  ...

  0000000000000010 <_sub_I_00099_0>:
    10:   f3 0f 1e fa             endbr64
    14:   e8 00 00 00 00          call   19 <_sub_I_00099_0+0x9>
                          15: R_X86_64_PLT32      __tsan_init-0x4
    19:   e9 00 00 00 00          jmp    1e <__UNIQUE_ID___addressable_cryptd_alloc_aead349+0x6>
                          1a: R_X86_64_PLT32      __x86_return_thunk-0x4
  -------------------

which, if it is built as a module goes through the intermediary stage of
creating a <module>.mod.c file which, when translated, receives a second
constructor:

  -------------------
  Disassembly of section .text.startup:

  0000000000000010 <_sub_I_00099_0>:
    10:   f3 0f 1e fa             endbr64
    14:   e8 00 00 00 00          call   19 <_sub_I_00099_0+0x9>
                          15: R_X86_64_PLT32      __tsan_init-0x4
    19:   e9 00 00 00 00          jmp    1e <_sub_I_00099_0+0xe>
                          1a: R_X86_64_PLT32      __x86_return_thunk-0x4

  ...

  0000000000000030 <_sub_I_00099_0>:
    30:   f3 0f 1e fa             endbr64
    34:   e8 00 00 00 00          call   39 <_sub_I_00099_0+0x9>
                          35: R_X86_64_PLT32      __tsan_init-0x4
    39:   e9 00 00 00 00          jmp    3e <__ksymtab_cryptd_alloc_ahash+0x2>
                          3a: R_X86_64_PLT32      __x86_return_thunk-0x4
  -------------------

in the .ko file.

Objtool has run already so that second constructor's return thunk cannot
be added to the .return_sites section and thus the return thunk remains
unpatched and the warning rightfully fires.

Drop KCSAN flags from the mod.c generation stage as those constructors
do not contain data races one would be interested about.

Debugged together with David Kaplan <David.Kaplan@amd.com> and Nikolay
Borisov <nik.borisov@suse.com>.

Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/0851a207-7143-417e-be31-8bf2b3afb57d@molgen.mpg.de
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: return accurate error code on open failure in open_fs_devices()

[ Upstream commit 2f1aeab9fca1a5f583be1add175d1ee95c213cfa ]

When attempting to exclusive open a device which has no exclusive open
permission, such as a physical device associated with the flakey dm
device, the open operation will fail, resulting in a mount failure.

In this particular scenario, we erroneously return -EINVAL instead of the
correct error code provided by the bdev_open_by_path() function, which is
-EBUSY.

Fix this, by returning error code from the bdev_open_by_path() function.
With this correction, the mount error message will align with that of
ext4 and xfs.

Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload

[ Upstream commit c214ed2a4dda35b308b0b28eed804d7ae66401f9 ]

The session resources are used by FW and driver when session is offloaded,
once session is uploaded these resources are not used. The lock is not
required as these fields won't be used any longer. The offload and upload
calls are sequential, hence lock is not required.

This will suppress following BUG_ON():

[  449.843143] ------------[ cut here ]------------
[  449.848302] kernel BUG at mm/vmalloc.c:2727!
[  449.853072] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[  449.858712] CPU: 5 PID: 1996 Comm: kworker/u24:2 Not tainted 5.14.0-118.el9.x86_64 #1
Rebooting.
[  449.867454] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.3.4 11/08/2016
[  449.876966] Workqueue: fc_rport_eq fc_rport_work [libfc]
[  449.882910] RIP: 0010:vunmap+0x2e/0x30
[  449.887098] Code: 00 65 8b 05 14 a2 f0 4a a9 00 ff ff 00 75 1b 55 48 89 fd e8 34 36 79 00 48 85 ed 74 0b 48 89 ef 31 f6 5d e9 14 fc ff ff 5d c3 <0f> 0b 0f 1f 44 00 00 41 57 41 56 49 89 ce 41 55 49 89 fd 41 54 41
[  449.908054] RSP: 0018:ffffb83d878b3d68 EFLAGS: 00010206
[  449.913887] RAX: 0000000080000201 RBX: ffff8f4355133550 RCX: 000000000d400005
[  449.921843] RDX: 0000000000000001 RSI: 0000000000001000 RDI: ffffb83da53f5000
[  449.929808] RBP: ffff8f4ac6675800 R08: ffffb83d878b3d30 R09: 00000000000efbdf
[  449.937774] R10: 0000000000000003 R11: ffff8f434573e000 R12: 0000000000001000
[  449.945736] R13: 0000000000001000 R14: ffffb83da53f5000 R15: ffff8f43d4ea3ae0
[  449.953701] FS:  0000000000000000(0000) GS:ffff8f529fc80000(0000) knlGS:0000000000000000
[  449.962732] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  449.969138] CR2: 00007f8cf993e150 CR3: 0000000efbe10003 CR4: 00000000003706e0
[  449.977102] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  449.985065] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  449.993028] Call Trace:
[  449.995756]  __iommu_dma_free+0x96/0x100
[  450.000139]  bnx2fc_free_session_resc+0x67/0x240 [bnx2fc]
[  450.006171]  bnx2fc_upload_session+0xce/0x100 [bnx2fc]
[  450.011910]  bnx2fc_rport_event_handler+0x9f/0x240 [bnx2fc]
[  450.018136]  fc_rport_work+0x103/0x5b0 [libfc]
[  450.023103]  process_one_work+0x1e8/0x3c0
[  450.027581]  worker_thread+0x50/0x3b0
[  450.031669]  ? rescuer_thread+0x370/0x370
[  450.036143]  kthread+0x149/0x170
[  450.039744]  ? set_kthread_struct+0x40/0x40
[  450.044411]  ret_from_fork+0x22/0x30
[  450.048404] Modules linked in: vfat msdos fat xfs nfs_layout_nfsv41_files rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver dm_service_time qedf qed crc8 bnx2fc libfcoe libfc scsi_transport_fc intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp dcdbas rapl intel_cstate intel_uncore mei_me pcspkr mei ipmi_ssif lpc_ich ipmi_si fuse zram ext4 mbcache jbd2 loop nfsv3 nfs_acl nfs lockd grace fscache netfs irdma ice sd_mod t10_pi sg ib_uverbs ib_core 8021q garp mrp stp llc mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi fb_sys_fops cec crct10dif_pclmul ahci crc32_pclmul bnx2x drm ghash_clmulni_intel libahci rfkill i40e libata megaraid_sas mdio wmi sunrpc lrw dm_crypt dm_round_robin dm_multipath dm_snapshot dm_bufio dm_mirror dm_region_hash dm_log dm_zero dm_mod linear raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid6_pq libcrc32c crc32c_intel raid1 raid0 iscsi_ibft squashfs be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls
[  450.048497]  libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi edd ipmi_devintf ipmi_msghandler
[  450.159753] ---[ end trace 712de2c57c64abc8 ]---

Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240315071427.31842-1-skashyap@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mark racy access on sk->sk_rcvbuf

[ Upstream commit c2deb2e971f5d9aca941ef13ee05566979e337a4 ]

sk->sk_rcvbuf in __sock_queue_rcv_skb() and __sk_receive_skb() can be
changed by other threads. Mark this as benign using READ_ONCE().

This patch is aimed at reducing the number of benign races reported by
KCSAN in order to focus future debugging effort on harmful races.

Signed-off-by: linke li <lilinke99@qq.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: fix rdev_dump_mpp() arguments order

[ Upstream commit ec50f3114e55406a1aad24b7dfaa1c3f4336d8eb ]

Fix the order of arguments in the TP_ARGS macro
for the rdev_dump_mpp tracepoint event.

Found by Linux Verification Center (linuxtesting.org).

Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Link: https://msgid.link/20240311164519.118398-1-Igor.A.Artemiev@mcst.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: fix ieee80211_bss_*_flags kernel-doc

[ Upstream commit 774f8841f55d7ac4044c79812691649da203584a ]

Running kernel-doc on ieee80211_i.h flagged the following:
net/mac80211/ieee80211_i.h:145: warning: expecting prototype for enum ieee80211_corrupt_data_flags. Prototype was for enum ieee80211_bss_corrupt_data_flags instead
net/mac80211/ieee80211_i.h:162: warning: expecting prototype for enum ieee80211_valid_data_flags. Prototype was for enum ieee80211_bss_valid_data_flags instead

Fix these warnings.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240314-kdoc-ieee80211_i-v1-1-72b91b55b257@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Fix invalid metadata access in punch_hole

[ Upstream commit c95346ac918c5badf51b9a7ac58a26d3bd5bb224 ]

In punch_hole(), when the offset lies in the final block for a given
height, there is no hole to punch, but the maximum size check fails to
detect that.  Consequently, punch_hole() will try to punch a hole beyond
the end of the metadata and fail.  Fix the maximum size check.

Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()

[ Upstream commit d11272be497e48a8e8f980470eb6b70e92eed0ce ]

The ndlp object update in lpfc_nvme_unregister_port() should be protected
by the ndlp lock rather than hbalock.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240305200503.57317-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic

[ Upstream commit bb011631435c705cdeddca68d5c85fd40a4320f9 ]

Typically when an out of resource CQE status is detected, the
lpfc_ramp_down_queue_handler() logic is called to help reduce I/O load by
reducing an sdev's queue_depth.

However, the current lpfc_rampdown_queue_depth() logic does not help reduce
queue_depth.  num_cmd_success is never updated and is always zero, which
means new_queue_depth will always be set to sdev->queue_depth.  So,
new_queue_depth = sdev->queue_depth - new_queue_depth always sets
new_queue_depth to zero.  And, scsi_change_queue_depth(sdev, 0) is
essentially a no-op.

Change the lpfc_ramp_down_queue_handler() logic to set new_queue_depth
equal to sdev->queue_depth subtracted from number of times num_rsrc_err was
incremented.  If num_rsrc_err is >= sdev->queue_depth, then set
new_queue_depth equal to 1.  Eventually, the frequency of Good_Status
frames will signal SCSI upper layer to auto increase the queue_depth back
to the driver default of 64 via scsi_handle_queue_ramp_up().

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240305200503.57317-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Move NPIV's transport unregistration to after resource clean up

[ Upstream commit 4ddf01f2f1504fa08b766e8cfeec558e9f8eef6c ]

There are cases after NPIV deletion where the fabric switch still believes
the NPIV is logged into the fabric.  This occurs when a vport is
unregistered before the Remove All DA_ID CT and LOGO ELS are sent to the
fabric.

Currently fc_remove_host(), which calls dev_loss_tmo for all D_IDs including
the fabric D_ID, removes the last ndlp reference and frees the ndlp rport
object.  This sometimes causes the race condition where the final DA_ID and
LOGO are skipped from being sent to the fabric switch.

Fix by moving the fc_remove_host() and scsi_remove_host() calls after DA_ID
and LOGO are sent.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240305200503.57317-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()

[ Upstream commit 6ddb4f372fc63210034b903d96ebbeb3c7195adb ]

vgic_v2_parse_attr() is responsible for finding the vCPU that matches
the user-provided CPUID, which (of course) may not be valid. If the ID
is invalid, kvm_get_vcpu_by_id() returns NULL, which isn't handled
gracefully.

Similar to the GICv3 uaccess flow, check that kvm_get_vcpu_by_id()
actually returns something and fail the ioctl if not.

Cc: stable@vger.kernel.org
Fixes: 7d450e282171 ("KVM: arm/arm64: vgic-new: Add userland access to VGIC dist registers")
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240424173959.3776798-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: vgic-v2: Use cpuid from userspace as vcpu_id

[ Upstream commit 4e7728c81a54b17bd33be402ac140bc11bb0c4f4 ]

When parsing a GICv2 attribute that contains a cpuid, handle this
as the vcpu_id, not a vcpu_idx, as userspace cannot really know
the mapping between the two. For this, use kvm_get_vcpu_by_id()
instead of kvm_get_vcpu().

Take this opportunity to get rid of the pointless check against
online_vcpus, which doesn't make much sense either, and switch
to FIELD_GET as a way to extract the vcpu_id.

Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230927090911.3355209-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Stable-dep-of: 6ddb4f372fc6 ("KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change

[ Upstream commit 7e91ed763dc07437777bd012af7a2bd4493731ff ]

While PLL CPUX clock rate change when CPU is running from it works in
vast majority of cases, now and then it causes instability. This leads
to system crashes and other undefined behaviour. After a lot of testing
(30+ hours) while also doing a lot of frequency switches, we can't
observe any instability issues anymore when doing reparenting to stable
clock like 24 MHz oscillator.

Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Reported-by: Chad Wagner <wagnerch42@gmail.com>
Link: https://forum.libreelec.tv/thread/27295-orange-pi-3-lts-freezes/
Tested-by: Chad Wagner <wagnerch42@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20231013181712.2128037-1-jernej.skrabec@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: gro: add flush check in udp_gro_receive_segment

[ Upstream commit 5babae777c61aa8a8679d59d3cdc54165ad96d42 ]

GRO-GSO path is supposed to be transparent and as such L3 flush checks are
relevant to all UDP flows merging in GRO. This patch uses the same logic
and code from tcp_gro_receive, terminating merge if flush is non zero.

Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: ili9341: Use predefined error codes

[ Upstream commit da85f0aaa9f21999753b01d45c0343f885a8f905 ]

In one case the -1 is returned which is quite confusing code for
the wrong device ID, in another the ret is returning instead of
plain 0 that also confusing as readed may ask the possible meaning
of positive codes, which are never the case there. Convert both
to use explicit predefined error codes to make it clear what's going
on there.

Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: ili9341: Respect deferred probe

[ Upstream commit 740fc1e0509be3f7e2207e89125b06119ed62943 ]

GPIO controller might not be available when driver is being probed.
There are plenty of reasons why, one of which is deferred probe.

Since GPIOs are optional, return any error code we got to the upper
layer, including deferred probe. With that in mind, use dev_err_probe()
in order to avoid spamming the logs.

Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qeth: Fix kernel panic after setting hsuid

[ Upstream commit 8a2e4d37afb8500b276e5ee903dee06f50ab0494 ]

Symptom:
When the hsuid attribute is set for the first time on an IQD Layer3
device while the corresponding network interface is already UP,
the kernel will try to execute a napi function pointer that is NULL.

Example:
---------------------------------------------------------------------------
[ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP
[ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de
s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod
 qdio ccwgroup pkey zcrypt
[ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1
[ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR)
[ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2)
[ 2057.572748]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
[ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000
[ 2057.572754]            00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80
[ 2057.572756]            000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8
[ 2057.572758]            00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68
[ 2057.572762] Krnl Code:#0000000000000000: 0000                illegal
                         >0000000000000002: 0000                illegal
                          0000000000000004: 0000                illegal
                          0000000000000006: 0000                illegal
                          0000000000000008: 0000                illegal
                          000000000000000a: 0000                illegal
                          000000000000000c: 0000                illegal
                          000000000000000e: 0000                illegal
[ 2057.572800] Call Trace:
[ 2057.572801] ([<00000000ec639700>] 0xec639700)
[ 2057.572803]  [<00000000913183e2>] net_rx_action+0x2ba/0x398
[ 2057.572809]  [<0000000091515f76>] __do_softirq+0x11e/0x3a0
[ 2057.572813]  [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58
[ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60)
[ 2057.572822]  [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98
[ 2057.572825]  [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70
[ 2057.572827]  [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv]
[ 2057.572830]  [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv]
[ 2057.572833]  [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv]
[ 2057.572835]  [<00000000912e7e90>] __sys_connect+0xa0/0xd8
[ 2057.572839]  [<00000000912e9580>] sys_socketcall+0x228/0x348
[ 2057.572841]  [<0000000091514e1a>] system_call+0x2a6/0x2c8
[ 2057.572843] Last Breaking-Event-Address:
[ 2057.572844]  [<0000000091317e44>] __napi_poll+0x4c/0x1d8
[ 2057.572846]
[ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt
-------------------------------------------------------------------------------------------

Analysis:
There is one napi structure per out_q: card->qdio.out_qs[i].napi
The napi.poll functions are set during qeth_open().

Since
commit 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
qeth_set_offline()/qeth_set_online() no longer call dev_close()/
dev_open(). So if qeth_free_qdio_queues() cleared
card->qdio.out_qs[i].napi.poll while the network interface was UP and the
card was offline, they are not set again.

Reproduction:
chzdev -e $devno layer2=0
ip link set dev $network_interface up
echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online
echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid
echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online
-> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...)

Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid
is set for the first time or when it is removed.

Workarounds:
- Set hsuid before setting the device online for the first time
or
- Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno;
to set hsuid on an existing device. (this will remove and recreate the
network interface)

Fix:
There is no need to free the output queues when a completion queue is
added or removed.
card->qdio.state now indicates whether the inbound buffer pool and the
outbound queues are allocated.
card->qdio.c_q indicates whether a CQ is allocated.

Fixes: 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430091004.2265683-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qeth: don't keep track of Input Queue count

[ Upstream commit dc15012bb083c70502b625cf56fbf32b6cf17fe4 ]

The only actual user of qdio.no_input_queues is qeth_qdio_establish(),
and there we already have full awareness of the current Input Queue
configuration (1 RX queue, plus potentially 1 TX Completion queue).

So avoid this state tracking, and the ambiguity it brings with it.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 8a2e4d37afb8 ("s390/qeth: Fix kernel panic after setting hsuid")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: fix a possible memleak in tipc_buf_append

[ Upstream commit 97bf6f81b29a8efaf5d0983251a7450e5794370d ]

__skb_linearize() doesn't free the skb when it fails, so move
'*buf = NULL' after __skb_linearize(), so that the skb can be
freed on the err path.

Fixes: b7df21cf1b79 ("tipc: skb_linearize the head skb when reassembling msgs")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/90710748c29a1521efac4f75ea01b3b7e61414cf.1714485818.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: core: reject skb_copy(_expand) for fraglist GSO skbs

[ Upstream commit d091e579b864fa790dd6a0cd537a22c383126681 ]

SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become
invalid. Return NULL if such an skb is passed to skb_copy or
skb_copy_expand, in order to prevent a crash on a potential later
call to skb_gso_segment.

Fixes: 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bridge: fix multicast-to-unicast with fraglist GSO

[ Upstream commit 59c878cbcdd80ed39315573b3511d0acfd3501b5 ]

Calling skb_copy on a SKB_GSO_FRAGLIST skb is not valid, since it returns
an invalid linearized skb. This code only needs to change the ethernet
header, so pskb_copy is the right function to call here.

Fixes: 6db6f0eae605 ("bridge: multicast to unicast")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341

[ Upstream commit b9a61c20179fda7bdfe2c1210aa72451991ab81a ]

The Topaz family (88E6141 and 88E6341) only support 256 Forwarding
Information Tables.

Fixes: a75961d0ebfd ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341")
Fixes: 1558727a1c1b ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6141")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240429133832.9547-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: Properly lock TX queue for the selftest.

[ Upstream commit 9067eccdd7849dd120d5495dbd5a686fa6ed2c1a ]

The selftest for the driver sends a dummy packet and checks if the
packet will be received properly as it should be. The regular TX path
and the selftest can use the same network queue so locking is required
and was missing in the selftest path. This was addressed in the commit
cited below.
Unfortunately locking the TX queue requires BH to be disabled which is
not the case in selftest path which is invoked in process context.
Lockdep should be complaining about this.

Use __netif_tx_lock_bh() for TX queue locking.

Fixes: c650e04898072 ("cxgb4: Fix race between loopback and normal Tx path")
Reported-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Closes: https://lore.kernel.org/all/Zic0ot5aGgR-V4Ks@thinkpad2021/
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240429091147.YWAaal4v@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cio: Ensure the copied buf is NUL terminated

[ Upstream commit da7c622cddd4fe36be69ca61e8c42e43cde94784 ]

Currently, we allocate a lbuf-sized kernel buffer and copy lbuf from
userspace to that buffer. Later, we use scanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using scanf. Fix this issue by using memdup_user_nul instead.

Fixes: a4f17cc72671 ("s390/cio: add CRW inject functionality")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-5-f1f1b53a10f4@gmail.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node()

[ Upstream commit c158cf914713efc3bcdc25680c7156c48c12ef6a ]

The documentation for device_get_named_child_node() mentions this
important point:

"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"

Add fwnode_handle_put() to avoid a leaked reference.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 08c2a4bc9f2a ("ALSA: hda: move Intel SoundWire ACPI scan to dedicated module")
Message-ID: <20240426152731.38420-1-pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: cards: select SND_DYNAMIC_MINORS

[ Upstream commit 6db26f9ea4edd8a17d39ab3c20111e3ccd704aef ]

Amlogic sound cards do create a lot of pcm interfaces, possibly more than
8. Some pcm interfaces are internal (like DPCM backends and c2c) and not
exposed to userspace.

Those interfaces still increase the number passed to snd_find_free_minor(),
which eventually exceeds 8 causing -EBUSY error on card registration if
CONFIG_SND_DYNAMIC_MINORS=n and the interface is exposed to userspace.

select CONFIG_SND_DYNAMIC_MINORS for Amlogic cards to avoid the problem.

Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426134150.3053741-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: axg-tdm-interface: manage formatters in trigger

[ Upstream commit bf5e4887eeddb48480568466536aa08ec7f179a5 ]

So far, the formatters have been reset/enabled using the .prepare()
callback. This was done in this callback because walking the formatters use
a mutex so it could not be done in .trigger(), which is atomic by default.

It turns out there is a problem on capture path of the AXG series.
The FIFO may get out of sync with the TDM decoder if the IP are not enabled
in a specific order. The FIFO must be enabled before the formatter starts
producing data. IOW, we must deal with FE before the BE. The .prepare()
callback is called on the BEs before the FE so it is not OK for the AXG.

The .trigger() callback order can be configured, and it deals with the FE
before the BEs by default. To solve our problem, we just need to start and
stop the formatters from the .trigger() callback. It is OK do so now that
the links have been made 'nonatomic' in the card driver.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20211020114217.133153-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: axg-card: make links nonatomic

[ Upstream commit e138233e56e9829e65b6293887063a1a3ccb2d68 ]

Non atomic operations need to be performed in the trigger callback
of the TDM interfaces. Those are BEs but what matters is the nonatomic
flag of the FE in the DPCM context. Just set nonatomic for everything so,
at least, it is clear.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20211020114217.133153-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: axg-fifo: use threaded irq to check periods

[ Upstream commit b11d26660dff8d7430892008616452dc8e5fb0f3 ]

With the AXG audio subsystem, there is a possible random channel shift on
TDM capture, when the slot number per lane is more than 2, and there is
more than one lane used.

The problem has been there since the introduction of the axg audio support
but such scenario is pretty uncommon. This is why there is no loud
complains about the problem.

Solving the problem require to make the links non-atomic and use the
trigger() callback to start FEs and BEs in the appropriate order.

This was tried in the past and reverted because it caused the block irq to
sleep while atomic. However, instead of reverting, the solution is to call
snd_pcm_period_elapsed() in a non atomic context.

Use the bottom half of a threaded IRQ to do so.

Fixes: 6dc4fa179fb8 ("ASoC: meson: add axg fifo base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: axg-fifo: use FIELD helpers

[ Upstream commit 9e6f39535c794adea6ba802a52c722d193c28124 ]

Use FIELD_GET() and FIELD_PREP() helpers instead of doing it manually.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240227150826.573581-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: b11d26660dff ("ASoC: meson: axg-fifo: use threaded irq to check periods")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qede: use return from qede_parse_actions()

[ Upstream commit f26f719a36e56381a1f4230e5364e7ad4d485888 ]

When calling qede_parse_actions() then the
return code was only used for a non-zero check,
and then -EINVAL was returned.

qede_parse_actions() can currently fail with:
* -EINVAL
* -EOPNOTSUPP

This patch changes the code to use the actual
return code, not just return -EINVAL.

The blaimed commit broke the implicit assumption
that only -EINVAL would ever be returned.

Only compile tested.

Fixes: 319a1d19471e ("flow_offload: check for basic action hw stats type")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qede: use return from qede_parse_flow_attr() for flow_spec

[ Upstream commit 27b44414a34b108c5a37cd5b4894f606061d86e7 ]

In qede_flow_spec_to_rule(), when calling
qede_parse_flow_attr() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.

qede_parse_flow_attr() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
* -EPROTONOSUPPORT

This patch changes the code to use the actual
return code, not just return -EINVAL.

The blaimed commit introduced qede_flow_spec_to_rule(),
and this call to qede_parse_flow_attr(), it looks
like it just duplicated how it was already used.

Only compile tested.

Fixes: 37c5d3efd7f8 ("qede: use ethtool_rx_flow_rule() to remove duplicated parser code")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qede: use return from qede_parse_flow_attr() for flower

[ Upstream commit fcee2065a178f78be6fd516302830378b17dba3d ]

In qede_add_tc_flower_fltr(), when calling
qede_parse_flow_attr() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.

qede_parse_flow_attr() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
* -EPROTONOSUPPORT

This patch changes the code to use the actual
return code, not just return -EINVAL.

The blaimed commit introduced these functions.

Only compile tested.

Fixes: 2ce9c93eaca6 ("qede: Ingress tc flower offload (drop action) support.")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qede: sanitize 'rc' in qede_add_tc_flower_fltr()

[ Upstream commit e25714466abd9d96901b15efddf82c60a38abd86 ]

Explicitly set 'rc' (return code), before jumping to the
unlock and return path.

By not having any code depend on that 'rc' remains at
it's initial value of -EINVAL, then we can re-use 'rc' for
the return code of function calls in subsequent patches.

Only compile tested.

Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: fcee2065a178 ("net: qede: use return from qede_parse_flow_attr() for flower")
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/vdso: Add CFI for RA register to asm macro vdso_func

[ Upstream commit b961ec10b9f9719987470236feb50c967db5a652 ]

The return-address (RA) register r14 is specified as volatile in the
s390x ELF ABI [1]. Nevertheless proper CFI directives must be provided
for an unwinder to restore the return address, if the RA register
value is changed from its value at function entry, as it is the case.

[1]: s390x ELF ABI, https://github.com/IBM/s390x-abi/releases

Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO")
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net l2tp: drop flow hash on forward

[ Upstream commit 42f853b42899d9b445763b55c3c8adc72be0f0e1 ]

Drop the flow-hash of the skb when forwarding to the L2TP netdev.

This avoids the L2TP qdisc from using the flow-hash from the outer
packet, which is identical for every flow within the tunnel.

This does not affect every platform but is specific for the ethernet
driver. It depends on the platform including L4 information in the
flow-hash.

One such example is the Mediatek Filogic MT798x family of networking
processors.

Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240424171110.13701-1-mail@david-bauer.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nsh: Restore skb->{protocol,data,mac_header} for outer header in nsh_gso_segment().

[ Upstream commit 4b911a9690d72641879ea6d13cce1de31d346d79 ]

syzbot triggered various splats (see [0] and links) by a crafted GSO
packet of VIRTIO_NET_HDR_GSO_UDP layering the following protocols:

  ETH_P_8021AD + ETH_P_NSH + ETH_P_IPV6 + IPPROTO_UDP

NSH can encapsulate IPv4, IPv6, Ethernet, NSH, and MPLS.  As the inner
protocol can be Ethernet, NSH GSO handler, nsh_gso_segment(), calls
skb_mac_gso_segment() to invoke inner protocol GSO handlers.

nsh_gso_segment() does the following for the original skb before
calling skb_mac_gso_segment()

  1. reset skb->network_header
  2. save the original skb->{mac_heaeder,mac_len} in a local variable
  3. pull the NSH header
  4. resets skb->mac_header
  5. set up skb->mac_len and skb->protocol for the inner protocol.

and does the following for the segmented skb

  6. set ntohs(ETH_P_NSH) to skb->protocol
  7. push the NSH header
  8. restore skb->mac_header
  9. set skb->mac_header + mac_len to skb->network_header
 10. restore skb->mac_len

There are two problems in 6-7 and 8-9.

  (a)
  After 6 & 7, skb->data points to the NSH header, so the outer header
  (ETH_P_8021AD in this case) is stripped when skb is sent out of netdev.

  Also, if NSH is encapsulated by NSH + Ethernet (so NSH-Ethernet-NSH),
  skb_pull() in the first nsh_gso_segment() will make skb->data point
  to the middle of the outer NSH or Ethernet header because the Ethernet
  header is not pulled by the second nsh_gso_segment().

  (b)
  While restoring skb->{mac_header,network_header} in 8 & 9,
  nsh_gso_segment() does not assume that the data in the linear
  buffer is shifted.

  However, udp6_ufo_fragment() could shift the data and change
  skb->mac_header accordingly as demonstrated by syzbot.

  If this happens, even the restored skb->mac_header points to
  the middle of the outer header.

It seems nsh_gso_segment() has never worked with outer headers so far.

At the end of nsh_gso_segment(), the outer header must be restored for
the segmented skb, instead of the NSH header.

To do that, let's calculate the outer header position relatively from
the inner header and set skb->{data,mac_header,protocol} properly.

[0]:
BUG: KMSAN: uninit-value in ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline]
BUG: KMSAN: uninit-value in ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
BUG: KMSAN: uninit-value in ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668
 ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline]
 ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
 ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668
 ipvlan_start_xmit+0x5c/0x1a0 drivers/net/ipvlan/ipvlan_main.c:222
 __netdev_start_xmit include/linux/netdevice.h:4989 [inline]
 netdev_start_xmit include/linux/netdevice.h:5003 [inline]
 xmit_one net/core/dev.c:3547 [inline]
 dev_hard_start_xmit+0x244/0xa10 net/core/dev.c:3563
 __dev_queue_xmit+0x33ed/0x51c0 net/core/dev.c:4351
 dev_queue_xmit include/linux/netdevice.h:3171 [inline]
 packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
 packet_snd net/packet/af_packet.c:3081 [inline]
 packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 __sys_sendto+0x735/0xa10 net/socket.c:2191
 __do_sys_sendto net/socket.c:2203 [inline]
 __se_sys_sendto net/socket.c:2199 [inline]
 __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 slab_post_alloc_hook mm/slub.c:3819 [inline]
 slab_alloc_node mm/slub.c:3860 [inline]
 __do_kmalloc_node mm/slub.c:3980 [inline]
 __kmalloc_node_track_caller+0x705/0x1000 mm/slub.c:4001
 kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582
 __alloc_skb+0x352/0x790 net/core/skbuff.c:651
 skb_segment+0x20aa/0x7080 net/core/skbuff.c:4647
 udp6_ufo_fragment+0xcab/0x1150 net/ipv6/udp_offload.c:109
 ipv6_gso_segment+0x14be/0x2ca0 net/ipv6/ip6_offload.c:152
 skb_mac_gso_segment+0x3e8/0x760 net/core/gso.c:53
 nsh_gso_segment+0x6f4/0xf70 net/nsh/nsh.c:108
 skb_mac_gso_segment+0x3e8/0x760 net/core/gso.c:53
 __skb_gso_segment+0x4b0/0x730 net/core/gso.c:124
 skb_gso_segment include/net/gso.h:83 [inline]
 validate_xmit_skb+0x107f/0x1930 net/core/dev.c:3628
 __dev_queue_xmit+0x1f28/0x51c0 net/core/dev.c:4343
 dev_queue_xmit include/linux/netdevice.h:3171 [inline]
 packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
 packet_snd net/packet/af_packet.c:3081 [inline]
 packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 __sys_sendto+0x735/0xa10 net/socket.c:2191
 __do_sys_sendto net/socket.c:2203 [inline]
 __se_sys_sendto net/socket.c:2199 [inline]
 __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 1 PID: 5101 Comm: syz-executor421 Not tainted 6.8.0-rc5-syzkaller-00297-gf2e367d6ad3b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024

Fixes: c411ed854584 ("nsh: add GSO support")
Reported-and-tested-by: syzbot+42a0dc856239de4de60e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=42a0dc856239de4de60e
Reported-and-tested-by: syzbot+c298c9f0e46a3c86332b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c298c9f0e46a3c86332b
Link: https://lore.kernel.org/netdev/20240415222041.18537-1-kuniyu@amazon.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240424023549.21862-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: avoid off-by-one read from userspace

[ Upstream commit f299ee709fb45036454ca11e90cb2810fe771878 ]

We try to access count + 1 byte from userspace with memdup_user(buffer,
count + 1). However, the userspace only provides buffer of count bytes and
only these count bytes are verified to be okay to access. To ensure the
copied buffer is NUL terminated, we use memdup_user_nul instead.

Fixes: 3a2eb515d136 ("octeontx2-af: Fix an off by one in rvu_dbg_qsize_write()")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-6-f1f1b53a10f4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bna: ensure the copied buf is NUL terminated

[ Upstream commit 8c34096c7fdf272fd4c0c37fe411cd2e3ed0ee9f ]

Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from
userspace to that buffer. Later, we use sscanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using sscanf. Fix this issue by using memdup_user_nul
instead of memdup_user.

Fixes: 7afc5dbde091 ("bna: Add debugfs interface.")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-2-f1f1b53a10f4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xdp: use flags field to disambiguate broadcast redirect

[ Upstream commit 5bcf0dcbf9066348058b88a510c57f70f384c92c ]

When redirecting a packet using XDP, the bpf_redirect_map() helper will set
up the redirect destination information in struct bpf_redirect_info (using
the __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect()
function will read this information after the XDP program returns and pass
the frame on to the right redirect destination.

When using the BPF_F_BROADCAST flag to do multicast redirect to a whole
map, __bpf_xdp_redirect_map() sets the 'map' pointer in struct
bpf_redirect_info to point to the destination map to be broadcast. And
xdp_do_redirect() reacts to the value of this map pointer to decide whether
it's dealing with a broadcast or a single-value redirect. However, if the
destination map is being destroyed before xdp_do_redirect() is called, the
map pointer will be cleared out (by bpf_clear_redirect_map()) without
waiting for any XDP programs to stop running. This causes xdp_do_redirect()
to think that the redirect was to a single target, but the target pointer
is also NULL (since broadcast redirects don't have a single target), so
this causes a crash when a NULL pointer is passed to dev_map_enqueue().

To fix this, change xdp_do_redirect() to react directly to the presence of
the BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_info
to disambiguate between a single-target and a broadcast redirect. And only
read the 'map' pointer if the broadcast flag is set, aborting if that has
been cleared out in the meantime. This prevents the crash, while keeping
the atomic (cmpxchg-based) clearing of the map pointer itself, and without
adding any more checks in the non-broadcast fast path.

Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support")
Reported-and-tested-by: syzbot+af9492708df9797198d6@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20240418071840.156411-1-toke@redhat.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xdp: Add xdp_do_redirect_frame() for pre-computed xdp_frames

[ Upstream commit 1372d34ccf6dd480332b2bcb2fd59a2b9a0df415 ]

Add an xdp_do_redirect_frame() variant which supports pre-computed
xdp_frame structures. This will be used in bpf_prog_run() to avoid having
to write to the xdp_frame structure when the XDP program doesn't modify the
frame boundaries.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220103150812.87914-6-toke@redhat.com
Stable-dep-of: 5bcf0dcbf906 ("xdp: use flags field to disambiguate broadcast redirect")
Signed-off-by: Sasha Levin <sashal@kernel.org>

xdp: Move conversion to xdp_frame out of map functions

[ Upstream commit d53ad5d8b218a885e95080d4d3d556b16b91b1b9 ]

All map redirect functions except XSK maps convert xdp_buff to xdp_frame
before enqueueing it. So move this conversion of out the map functions
and into xdp_do_redirect(). This removes a bit of duplicated code, but more
importantly it makes it possible to support caller-allocated xdp_frame
structures, which will be added in a subsequent commit.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220103150812.87914-5-toke@redhat.com
Stable-dep-of: 5bcf0dcbf906 ("xdp: use flags field to disambiguate broadcast redirect")
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/mm: Fix clearing storage keys for huge pages

[ Upstream commit 412050af2ea39407fe43324b0be4ab641530ce88 ]

The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. I.e. end - start
should be the size of the area to be initialized.

The current code works because __storage_key_init_range() will still loop
over every page in the range, but it is slower than using sske_frame().

Fixes: 3afdfca69870 ("s390/mm: Clear skeys for newly mapped huge guest pmds")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416114220.28489-3-imbrenda@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/mm: Fix storage key clearing for guest huge pages

[ Upstream commit 843c3280686fc1a83d89ee1e0b5599c9f6b09d0c ]

The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. I.e. end - start
should be the size of the area to be initialized.

The current code works because __storage_key_init_range() will still loop
over every page in the range, but it is slower than using sske_frame().

Fixes: 964c2c05c9f3 ("s390/mm: Clear huge page storage keys on enable_skey")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416114220.28489-2-imbrenda@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: hisi-kunpeng: Delete the dump interface of data registers in debugfs

[ Upstream commit 7430764f5a85d30314aeef2d5438dff1fb0b1d68 ]

Due to the reading of FIFO during the dump of data registers in
debugfs, if SPI transmission is in progress, it will be affected
and may result in transmission failure. Therefore, the dump
interface of data registers in debugfs is removed.

Fixes: 2b2142f247eb ("spi: hisi-kunpeng: Add debugfs support")
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/20240416015839.3323398-1-liudingyuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix a verifier verbose message

[ Upstream commit 37eacb9f6e89fb399a79e952bc9c78eb3e16290e ]

Long ago a map file descriptor in a pseudo ldimm64 instruction could
only be present as an immediate value insn[0].imm, and thus this value
was used in a verbose verifier message printed when the file descriptor
wasn't valid. Since addition of BPF_PSEUDO_MAP_IDX_VALUE/BPF_PSEUDO_MAP_IDX
the insn[0].imm field can also contain an index pointing to the file
descriptor in the attr.fd_array array. However, if the file descriptor
is invalid, the verifier still prints the verbose message containing
value of insn[0].imm. Patch the verifier message to always print the
actual file descriptor value.

Fixes: 387544bfa291 ("bpf: Introduce fd_idx")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240412141100.3562942-1-aspsk@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue

[ Upstream commit 6648e613226e18897231ab5e42ffc29e63fa3365 ]

Fix NULL pointer data-races in sk_psock_skb_ingress_enqueue() which
syzbot reported [1].

[1]
BUG: KCSAN: data-race in sk_psock_drop / sk_psock_skb_ingress_enqueue

write to 0xffff88814b3278b8 of 8 bytes by task 10724 on cpu 1:
 sk_psock_stop_verdict net/core/skmsg.c:1257 [inline]
 sk_psock_drop+0x13e/0x1f0 net/core/skmsg.c:843
 sk_psock_put include/linux/skmsg.h:459 [inline]
 sock_map_close+0x1a7/0x260 net/core/sock_map.c:1648
 unix_release+0x4b/0x80 net/unix/af_unix.c:1048
 __sock_release net/socket.c:659 [inline]
 sock_close+0x68/0x150 net/socket.c:1421
 __fput+0x2c1/0x660 fs/file_table.c:422
 __fput_sync+0x44/0x60 fs/file_table.c:507
 __do_sys_close fs/open.c:1556 [inline]
 __se_sys_close+0x101/0x1b0 fs/open.c:1541
 __x64_sys_close+0x1f/0x30 fs/open.c:1541
 do_syscall_64+0xd3/0x1d0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

read to 0xffff88814b3278b8 of 8 bytes by task 10713 on cpu 0:
 sk_psock_data_ready include/linux/skmsg.h:464 [inline]
 sk_psock_skb_ingress_enqueue+0x32d/0x390 net/core/skmsg.c:555
 sk_psock_skb_ingress_self+0x185/0x1e0 net/core/skmsg.c:606
 sk_psock_verdict_apply net/core/skmsg.c:1008 [inline]
 sk_psock_verdict_recv+0x3e4/0x4a0 net/core/skmsg.c:1202
 unix_read_skb net/unix/af_unix.c:2546 [inline]
 unix_stream_read_skb+0x9e/0xf0 net/unix/af_unix.c:2682
 sk_psock_verdict_data_ready+0x77/0x220 net/core/skmsg.c:1223
 unix_stream_sendmsg+0x527/0x860 net/unix/af_unix.c:2339
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg+0x140/0x180 net/socket.c:745
 ____sys_sendmsg+0x312/0x410 net/socket.c:2584
 ___sys_sendmsg net/socket.c:2638 [inline]
 __sys_sendmsg+0x1e9/0x280 net/socket.c:2667
 __do_sys_sendmsg net/socket.c:2676 [inline]
 __se_sys_sendmsg net/socket.c:2674 [inline]
 __x64_sys_sendmsg+0x46/0x50 net/socket.c:2674
 do_syscall_64+0xd3/0x1d0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

value changed: 0xffffffff83d7feb0 -> 0x0000000000000000

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 10713 Comm: syz-executor.4 Tainted: G        W          6.8.0-syzkaller-08951-gfe46a7dd189e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024

Prior to this, commit 4cd12c6065df ("bpf, sockmap: Fix NULL pointer
dereference in sk_psock_verdict_data_ready()") fixed one NULL pointer
similarly due to no protection of saved_data_ready. Here is another
different caller causing the same issue because of the same reason. So
we should protect it with sk_callback_lock read lock because the writer
side in the sk_psock_drop() uses "write_lock_bh(&sk->sk_callback_lock);".

To avoid errors that could happen in future, I move those two pairs of
lock into the sk_psock_data_ready(), which is suggested by John Fastabend.

Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Reported-by: syzbot+aa8c8ec2538929f18f2d@syzkaller.appspotmail.com
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=aa8c8ec2538929f18f2d
Link: https://lore.kernel.org/all/20240329134037.92124-1-kerneljasonxing@gmail.com
Link: https://lore.kernel.org/bpf/20240404021001.94815-1-kerneljasonxing@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, kconfig: Fix DEBUG_INFO_BTF_MODULES Kconfig definition

[ Upstream commit 229087f6f1dc2d0c38feba805770f28529980ec0 ]

Turns out that due to CONFIG_DEBUG_INFO_BTF_MODULES not having an
explicitly specified "menu item name" in Kconfig, it's basically
impossible to turn it off (see [0]).

This patch fixes the issue by defining menu name for
CONFIG_DEBUG_INFO_BTF_MODULES, which makes it actually adjustable
and independent of CONFIG_DEBUG_INFO_BTF, in the sense that one can
have DEBUG_INFO_BTF=y and DEBUG_INFO_BTF_MODULES=n.

We still keep it as defaulting to Y, of course.

Fixes: 5f9ae91f7c0d ("kbuild: Build kernel module BTFs if BTF is enabled and pahole supports it")
Reported-by: Vincent Li <vincent.mc.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/CAK3+h2xiFfzQ9UXf56nrRRP=p1+iUxGoEP5B+aq9MDT5jLXDSg@mail.gmail.com
Link: https://lore.kernel.org/bpf/20240404220344.3879270-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: mt6360: De-capitalize devicetree regulator subnodes

[ Upstream commit d3cf8a17498dd9104c04ad28eeac3ef3339f9f9f ]

The MT6360 regulator binding, the example in the MT6360 mfd binding, and
the devicetree users of those bindings are rightfully declaring MT6360
regulator subnodes with non-capital names, and luckily without using the
deprecated regulator-compatible property.

With this driver declaring capitalized BUCKx/LDOx as of_match string for
the node names, obviously no regulator gets probed: fix that by changing
the MT6360_REGULATOR_DESC macro to add a "match" parameter which gets
assigned to the of_match.

Fixes: d321571d5e4c ("regulator: mt6360: Add support for MT6360 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240409144438.410060-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map()

[ Upstream commit a0cedbcc8852d6c77b00634b81e41f17f29d9404 ]

If we fail to allocate propname buffer, we need to drop the reference
count we just took. Because the pinctrl_dt_free_maps() includes the
droping operation, here we call it directly.

Fixes: 91d5c5060ee2 ("pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20240415105328.3651441-1-zengheng4@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: mt6360_charger: Fix of_match for usb-otg-vbus regulator

[ Upstream commit 1e0fb113646182e073539db96016b00cfeb18ecc ]

The of_match shall correspond to the name of the regulator subnode,
or the deprecated `regulator-compatible` property must be used:
failing to do so, the regulator won't probe (and the driver will
as well not probe).

Since the devicetree binding for this driver is actually correct
and wants DTs to use the "usb-otg-vbus-regulator" subnode name,
fix this driver by aligning the `of_match` string to what the DT
binding wants.

Fixes: 0402e8ebb8b8 ("power: supply: mt6360_charger: add MT6360 charger support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240410084405.1389378-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: rt9455: hide unused rt9455_boost_voltage_values

[ Upstream commit 452d8950db3e839aba1bb13bc5378f4bac11fa04 ]

The rt9455_boost_voltage_values[] array is only used when USB PHY
support is enabled, causing a W=1 warning otherwise:

drivers/power/supply/rt9455_charger.c:200:18: error: 'rt9455_boost_voltage_values' defined but not used [-Werror=unused-const-variable=]

Enclose the definition in the same #ifdef as the references to it.

Fixes: e86d69dd786e ("power_supply: Add support for Richtek RT9455 battery charger")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-10-arnd@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs: Handle error of rpc_proc_register() in nfs_net_init().

[ Upstream commit 24457f1be29f1e7042e50a7749f5c2dde8c433c8 ]

syzkaller reported a warning [0] triggered while destroying immature
netns.

rpc_proc_register() was called in init_nfs_fs(), but its error
has been ignored since at least the initial commit 1da177e4c3f4
("Linux-2.6.12-rc2").

Recently, commit d47151b79e32 ("nfs: expose /proc/net/sunrpc/nfs
in net namespaces") converted the procfs to per-netns and made
the problem more visible.

Even when rpc_proc_register() fails, nfs_net_init() could succeed,
and thus nfs_net_exit() will be called while destroying the netns.

Then, remove_proc_entry() will be called for non-existing proc
directory and trigger the warning below.

Let's handle the error of rpc_proc_register() properly in nfs_net_init().

[0]:
name 'nfs'
WARNING: CPU: 1 PID: 1710 at fs/proc/generic.c:711 remove_proc_entry+0x1bb/0x2d0 fs/proc/generic.c:711
Modules linked in:
CPU: 1 PID: 1710 Comm: syz-executor.2 Not tainted 6.8.0-12822-gcd51db110a7e #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:remove_proc_entry+0x1bb/0x2d0 fs/proc/generic.c:711
Code: 41 5d 41 5e c3 e8 85 09 b5 ff 48 c7 c7 88 58 64 86 e8 09 0e 71 02 e8 74 09 b5 ff 4c 89 e6 48 c7 c7 de 1b 80 84 e8 c5 ad 97 ff <0f> 0b eb b1 e8 5c 09 b5 ff 48 c7 c7 88 58 64 86 e8 e0 0d 71 02 eb
RSP: 0018:ffffc9000c6d7ce0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8880422b8b00 RCX: ffffffff8110503c
RDX: ffff888030652f00 RSI: ffffffff81105045 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: ffffffff81bb62cb R12: ffffffff84807ffc
R13: ffff88804ad6fcc0 R14: ffffffff84807ffc R15: ffffffff85741ff8
FS:  00007f30cfba8640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff51afe8000 CR3: 000000005a60a005 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 rpc_proc_unregister+0x64/0x70 net/sunrpc/stats.c:310
 nfs_net_exit+0x1c/0x30 fs/nfs/inode.c:2438
 ops_exit_list+0x62/0xb0 net/core/net_namespace.c:170
 setup_net+0x46c/0x660 net/core/net_namespace.c:372
 copy_net_ns+0x244/0x590 net/core/net_namespace.c:505
 create_new_namespaces+0x2ed/0x770 kernel/nsproxy.c:110
 unshare_nsproxy_namespaces+0xae/0x160 kernel/nsproxy.c:228
 ksys_unshare+0x342/0x760 kernel/fork.c:3322
 __do_sys_unshare kernel/fork.c:3393 [inline]
 __se_sys_unshare kernel/fork.c:3391 [inline]
 __x64_sys_unshare+0x1f/0x30 kernel/fork.c:3391
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x46/0x4e
RIP: 0033:0x7f30d0febe5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007f30cfba7cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f30d0febe5d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000006c020600
RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
R13: 000000000000000b R14: 00007f30d104c530 R15: 0000000000000000
 </TASK>

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs: make the rpc_stat per net namespace

[ Upstream commit 1548036ef1204df65ca5a16e8b199c858cb80075 ]

Now that we're exposing the rpc stats on a per-network namespace basis,
move this struct into struct nfs_net and use that to make sure only the
per-network namespace stats are exposed.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 24457f1be29f ("nfs: Handle error of rpc_proc_register() in nfs_net_init().")
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs: expose /proc/net/sunrpc/nfs in net namespaces

[ Upstream commit d47151b79e3220e72ae323b8b8e9d6da20dc884e ]

We're using nfs mounts inside of containers in production and noticed
that the nfs stats are not exposed in /proc.  This is a problem for us
as we use these stats for monitoring, and have to do this awkward bind
mount from the main host into the container in order to get to these
states.

Add the rpc_proc_register call to the pernet operations entry and exit
points so these stats can be exposed inside of network namespaces.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 24457f1be29f ("nfs: Handle error of rpc_proc_register() in nfs_net_init().")
Signed-off-by: Sasha Levin <sashal@kernel.org>

sunrpc: add a struct rpc_stats arg to rpc_create_args

[ Upstream commit 2057a48d0dd00c6a2a94ded7df2bf1d3f2a4a0da ]

We want to be able to have our rpc stats handled in a per network
namespace manner, so add an option to rpc_create_args to specify a
different rpc_stats struct instead of using the one on the rpc_program.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 24457f1be29f ("nfs: Handle error of rpc_proc_register() in nfs_net_init().")
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE

[ Upstream commit c5d3b64c568a344e998830e0e94a7c04e372f89b ]

There is a misinterpretation of some of the PIN_CONFIG_* options in this
driver library. PIN_CONFIG_OUTPUT_ENABLE should refer to a buffer or
switch in the output direction of the electrical path. The MediaTek
hardware does not have such a thing. The driver incorrectly maps this
option to the GPIO function's direction.

Likewise, PIN_CONFIG_INPUT_ENABLE should refer to a buffer or switch in
the input direction. The hardware does have such a mechanism, and is
mapped to the IES bit. The driver however sets the direction in addition
to the IES bit, which is incorrect. On readback, the IES bit isn't even
considered.

Ironically, the driver does not support readback for PIN_CONFIG_OUTPUT,
while its readback of PIN_CONFIG_{INPUT,OUTPUT}_ENABLE is what it should
be doing for PIN_CONFIG_OUTPUT.

Rework support for these three options, so that PIN_CONFIG_OUTPUT_ENABLE
is completely removed, PIN_CONFIG_INPUT_ENABLE is only linked to the IES
bit, and PIN_CONFIG_OUTPUT is linked to the GPIO function's direction
and output level.

Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20240327091336.3434141-3-wenst@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback

[ Upstream commit 08f66a8edd08f6f7cfa769c81634b29a2b123908 ]

In the generic pin config library, readback of some options are handled
differently compared to the setting of those options: the argument value
is used to convey enable/disable of an option in the set path, but
success or -EINVAL is used to convey if an option is enabled or disabled
in the debugfs readback path.

PIN_CONFIG_INPUT_SCHMITT_ENABLE is one such option. Fix the readback of
the option in the mediatek-paris library, so that the debugfs dump is
not showing "input schmitt enabled" for pins that don't have it enabled.

Fixes: 1bea6afbc842 ("pinctrl: mediatek: Refine mtk_pinconf_get()")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20240327091336.3434141-2-wenst@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mediatek: paris: Rework mtk_pinconf_{get,set} switch/case logic

[ Upstream commit 9b780fa1ff14663c2e0f07ad098b96b8337f27a4 ]

The current code deals with optional features by testing for the
function pointers and returning -ENOTSUPP if it is not valid. This is
done for multiple pin config settings and results in the code that
handles the supporting cases to get indented by one level. This is
aggrevated by the fact that some features require another level of
conditionals.

Instead of assigning the same error code in all unsupported optional
feature cases, simply have that error code as the default, and break
out of the switch/case block whenever a feature is unsupported, or an
error is returned. This reduces indentation by one level for the useful
code.

Also replace the goto statements with break statements. The result is
the same, as the gotos simply exit the switch/case block, which can
also be achieved with a break statement. With the latter the intent
is clear and easier to understand.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-8-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: 08f66a8edd08 ("pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback")
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: core: delete incorrect free in pinctrl_enable()

[ Upstream commit 5038a66dad0199de60e5671603ea6623eb9e5c79 ]

The "pctldev" struct is allocated in devm_pinctrl_register_and_init().
It's a devm_ managed pointer that is freed by devm_pinctrl_dev_release(),
so freeing it in pinctrl_enable() will lead to a double free.

The devm_pinctrl_dev_release() function frees the pindescs and destroys
the mutex as well.

Fixes: 6118714275f0 ("pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <578fbe56-44e9-487c-ae95-29b695650f7c@moroto.mountain>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl/meson: fix typo in PDM's pin name

[ Upstream commit 368a90e651faeeb7049a876599cf2b0d74954796 ]

Other pins have _a or _x suffix, but this one doesn't have any. Most
likely this is a typo.

Fixes: dabad1ff8561 ("pinctrl: meson: add pinctrl driver support for Meson-A1 SoC")
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Message-ID: <20240325113058.248022-1-jan.dakinevich@salutedevices.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T

[ Upstream commit c10cd03d69403fa0f00be8631bd4cb4690440ebd ]

The register offset to disable the internal pull-down of GPIOR~T is 0x630
instead of 0x620, as specified in the Ast2600 datasheet v15
The datasheet can download from the official Aspeed website.

Fixes: 15711ba6ff19 ("pinctrl: aspeed-g6: Add AST2600 pinconf support")
Reported-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-ID: <20240313092809.2596644-1-billy_tsai@aspeedtech.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

eeprom: at24: fix memory corruption race condition

[ Upstream commit f42c97027fb75776e2e9358d16bf4a99aeb04cf2 ]

If the eeprom is not accessible, an nvmem device will be registered, the
read will fail, and the device will be torn down. If another driver
accesses the nvmem device after the teardown, it will reference
invalid memory.

Move the failure point before registering the nvmem device.

Signed-off-by: Daniel Okazaki <dtokazaki@google.com>
Fixes: b20eb4c1f026 ("eeprom: at24: drop unnecessary label")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240422174337.2487142-1-dtokazaki@google.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

eeprom: at24: Probe for DDR3 thermal sensor in the SPD case

[ Upstream commit caba40ec3531b0849f44502a03117796e8c9f4a1 ]

The DDR3 SPD data structure advertises the presence of a thermal
sensor on a DDR3 module in byte 32, bit 7. Let's use this information
to explicitly instantiate the thermal sensor I2C client instead of
having to rely on class-based I2C probing.

The temp sensor i2c address can be derived from the SPD i2c address,
so we can directly instantiate the device and don't have to probe
for it. If the temp sensor has been instantiated already by other
means (e.g. class-based auto-detection), then the busy-check in
i2c_new_client_device will detect this.

Note: Thermal sensors on DDR4 DIMM's are instantiated from the
      ee1004 driver.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/68113672-3724-44d5-9ff8-313dd6628f8c@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: f42c97027fb7 ("eeprom: at24: fix memory corruption race condition")
Signed-off-by: Sasha Levin <sashal@kernel.org>

eeprom: at24: Use dev_err_probe for nvmem register failure

[ Upstream commit a3c10035d12f5ec10915d5c00c2e8f7d7c066182 ]

When using nvmem layouts it is possible devm_nvmem_register returns
-EPROBE_DEFER, resulting in an 'empty' in
/sys/kernel/debug/devices_deferred. Use dev_err_probe for providing
additional information.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: f42c97027fb7 ("eeprom: at24: fix memory corruption race condition")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: clear RENAME_NOREPLACE before calling vfs_rename

[ Upstream commit 4973b04d3ea577db80c501c5f14e68ec69fe1794 ]

File overwrite case is explicitly handled, so it is not necessary to
pass RENAME_NOREPLACE to vfs_rename.

Clearing the flag fixes rename operations when the share is a ntfs-3g
mount. The latter uses an older version of fuse with no support for
flags in the ->rename op.

Cc: stable@vger.kernel.org
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: validate request buffer size in smb2_allocate_rsp_buf()

[ Upstream commit 17cf0c2794bdb6f39671265aa18aea5c22ee8c4a ]

The response buffer should be allocated in smb2_allocate_rsp_buf
before validating request. But the fields in payload as well as smb2 header
is used in smb2_allocate_rsp_buf(). This patch add simple buffer size
validation to avoid potencial out-of-bounds in request buffer.

Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf

[ Upstream commit c119f4ede3fa90a9463f50831761c28f989bfb20 ]

If ->ProtocolId is SMB2_TRANSFORM_PROTO_NUM, smb2 request size
validation could be skipped. if request size is smaller than
sizeof(struct smb2_query_info_req), slab-out-of-bounds read can happen in
smb2_allocate_rsp_buf(). This patch allocate response buffer after
decrypting transform request. smb3_decrypt_req() will validate transform
request size and avoid slab-out-of-bound in smb2_allocate_rsp_buf().

Reported-by: Norbert Szetei <norbert@doyensec.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: nl80211: don't free NULL coalescing rule

[ Upstream commit 801ea33ae82d6a9d954074fbcf8ea9d18f1543a7 ]

If the parsing fails, we can dereference a NULL pointer here.

Cc: stable@vger.kernel.org
Fixes: be29b99a9b51 ("cfg80211/nl80211: Add packet coalesce support")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240418105220.b328f80406e7.Id75d961050deb05b3e4e354e024866f350c68103@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>